Carbon Monoxide (CO) is the #1 cause of poisonings in the U.S. Yet less than 5% of all CO poisonings are reported! The safe and efficient operation of your heating equipment and other combustion appliances cannot be determined without testing using a calibrated combustion analyzer. Because the technology, instruments, and training to do this testing correctly has only been available for a few years, odds are it’s never been done. Your service technician should be certified to properly test and diagnose potential CO exposure.
Carbon monoxide, even in small quantities, can cause serious health problems, particularly in children and the elderly. Millions of unsuspecting homeowners are exposed to low levels of CO and don’t even know it. Unfortunately U.L.-Listed CO alarms don’t go off until your family has been exposed to 70 ppm (parts per million) for over 3-1/2 hours! Most international limits for unsafe levels, including OSHA and the World Health Organization’s guidelines, are between at 15-35 ppm. Carbon monoxide can come from additional sources in your home besides the heating equipment, and those sources should also be checked. They include your Water Heater, Gas Range, Gas Logs, Space Heater, and Boiler — even an attached garage.
Anytime equipment is installed, it’s being exposed to conditions in which it hasn’t been tested to perform. Venting systems, combustion air, duct systems, additional appliances in the building, building pressure etc., can all affect its operation. Besides that, after leaving the factory, it’s likely your equipment has been loaded and unloaded on trucks and transported several times. Vibration and shock can cause components to shift and move. The only way to truly know if your new equipment is operating safely and efficiently is to test it once it’s been installed.
They measure. If CO testing is part of the HVAC professional’s normal protocols, he or she will advise you of this prior to servicing or installing equipment. Odds are when the tech walks into you house he’ll be carrying some type of CO monitor to immediately check if unsafe CO levels are present. When working on the equipment, the tech will likely drill a hole in the flue of the appliance, and insert the probe of an electronic combustion analyzer to check actual burner performance. Additional performance testing might require holes to be drilled into the ductwork as well. Once finished testing, he or she should provide documentation and review the results with you.
As a consumer you should expect your HVAC professional to be trained in current technology that makes sure you’re heating system is safe, comfortable, and efficient. These are probably things you may expect are mandatory, but unfortunately they’re not. .
The HVAC professional should be trained to measure the safety and efficiency of all your combustion equipment, even appliances that he or she doesn’t normally sell or service. Thorough testing can also verify that your equipment is operating at peak efficiency and provide the lowest operating costs. Finally, he or she should provide you with documentation that explains what has been found and what corrections have been or need to be performed. He or she should also provide you with material to better educate you about carbon monoxide sources and health effects.
Surviving a frigid winter means running the furnace day and night to keep your home comfortable. Many of us can’t even imagine going one day without heating when the temperatures hover below 30 degrees for most of the season. No one likes to pay the outrageous gas bill, but it is a sacrifice that many of us to make in order to stay warm all winter long. But what if you didn’t have to make that sacrifice?
It is possible to reduce your energy bills by pairing your current gas power furnace with an electricity powered heat pump. A heat pump is a two in one unit. It uses electricity to move heat to effectively provide heating and cooling. An air source heat pump works by pulling the hot air inside the home to the outdoors in the summer. By removing the heat from inside the home, the temperature is lowered. In the winter, the heat pump pulls hot air from the air outside and pumps it indoors. This type of unit is extremely energy efficient and will cost less to run than if you were to use the gas furnace.
Extremely cold temperatures do not allow homeowners to only run heat pumps in their home. It is better to have your gas furnace paired with the heat pump. On the days when the air outside is bitter cold, the heat pump is not able to pull enough heat out of the air to generate enough heat to get the temperature at a comfortable level. On the days when this happens, you can use the gas furnace as the primary heat source.
By having both units in your home, you will be able to take a huge load off of your furnace. Using the furnace less frequently will lower your gas bill, and having both units gives you the flexibility to choose which unit will cost you less to run. During times when electricity costs more you can opt to use the gas furnace and vice versa. You may even extend the life of your furnace because you are putting less of a strain on the unit by using it less frequently.
Also, pairing the heat pump with a new high efficiency furnace will increase your energy savings even more! There are new high efficiency gas furnaces on the market nowadays that are over 95% efficient with the gas that they consume. If you haven’t replaced your unit in over 15 to 20 years, the system in your home is probably horribly inefficient when compared to the newer models. It may seem like a bit of an investment right now, but within a couple years, your new systems will have paid for themselves in energy savings.
Pairing your gas furnace with an electric heat pump is a great way to save money on your energy bills. By sharing the load, the two units will work together to keep your home at a comfortable temperature all winter long.
Contact us today for a free estimate on a new gas furnace or electric heat pump!
The average furnace lifespan can vary between 15-20 years. If you have an old inefficient unit and been holding off on replacement, it may be costing you more money in the long run. Today we’ll take a look at 7 of the most common reasons to replace your furnace.
Our full line of Lennox furnaces are designed to deliver reliable and economical warmth and have efficiency ratings from 80% all the way up to 98% AFUE. Contact us today for a free estimate on a new furnace and be on your way to a warm and comfortable winter.
These days, it seems like everyone is talking about energy efficiency. Light bulbs, washers, dryers, and HVAC systems are often at the center of the discussion. Everyone is looking to save money and do their part to be eco-friendly as well. This winter, you may even be looking to swap out that old furnace for a new high efficiency model. Our SLP98V Furnace is the most efficient and the quietest furnace you will find of the market today.
The SLP98V has several features that enable it to boast such high efficiency and quiet operation. For starters, this furnace has an AFUE rating of 98.2%! That means that almost 100% of the gas used to run this furnace is used to generate heat. Older models have much lower ratings. If your current furnace was purchased before 1992 then there is a good chance that it is less than 75% efficient. That means that you are currently throwing away hundreds of dollars a year when you could be saving up to $800 a year with the Lennox SLP98V.
This furnace is able to achieve such a high rating because of its variable speed blower motor and its SureLight igniter. The variable speed blower motor is self-calibrating. This means that it is able to automatically adjust to meet your needs. For example, if the temperature outside is more mild, the motor will adjust to a lower setting to conserve energy while still allowing the heating needs to be met in the home. This type of blower also allows for quiet operation because it is not always running on high. The igniter is a type of electronic ignition that only lights when the furnace calls for heat. Older models use a standing pilot that requires a constant stream of gas to stay lit 24/7. By only lighting when you need heat, this pilot is a major contributor to the energy efficiency of this furnace.
Many homes put up with a noisy furnace because they think that that is there only option. However, it doesn’t have to sound like there is a helicopter landing in your basement every time the furnace kicks on. With the SLP98V you also get extremely quiet operation. Lennox has engineered new technology that makes their furnaces 50% quieter than your average unit. With the help of the variable speed blower motor and a fully insulated cabinet, furnace like the SLP98V achieve virtually silent operation even at higher speeds.
How does this technology affect me?
Besides saving you loads of money every year on your energy bills, the technology in the Lennox SLP98V furnace is used to increase your personal home comfort. Quiet operation allows you to enjoy near silence throughout your home. The variable speed blower also uses Precise Comfort Technology. This technology helps your furnace have more than just a high and low setting. It adjusts the fan speed in increments as small at 1%. What this means to you is that when you set the thermostat at a certain temperature, the furnace will automatically adjust to meet that temperature by changing heat and airflow capacity. That translates into precise temperatures and comfort in your home all winter long.
We offer a variety of high-efficiency furnaces to choose from and offer free in-home estimates from our factory trained and licensed comfort specialists. Contact us today to be on your way to saving money on your energy bills!
Furnaces are very safe machines, but under the right circumstances and with the right malfunctions, they can be dangerous machines. That should be no surprise. They ignite combustible gasses to create heat and fire to warm your homes. If this sophisticated system is damaged, or otherwise faulty, the consequences can be more extreme than a chilly evening.
Primarily, the largest danger and most serious malfunction is a crack in the heat exchanger. The heat exchanger is a metal shield in the furnace that is directly warmed by the combusting gasses and fire in the burner of the furnace. The purpose of the part is to allow only the heat to transfer to the air in your vents while keeping any exhaust and fumes out of your indoor air. A crack in this heat exchanger allows such dangerous gasses as carbon monoxide to leak through into your ductwork.
A heat exchanger should last 15-20 years, but, there are a few factors that could lead to a premature crack!
While most heat exchangers will last throughout the entire lifespan of the furnace without problem, the consequences of an undiscovered crack are seriousness enough to remain vigilant. The best way to monitor your furnace and identify a problem in your heat exchanger is through annual maintenance. Schedule your Tuneup, and let our technicians inspect every aspect of your furnace.
Schedule your $69 Furnace Tuneup Today!
This winter, just like every winter before, thousands of furnaces will fail and need to be replaced. The problem is that every year, thousands of those furnaces are improperly sized for the homes that they are installed in. Furnaces are not one size fits all and calculating square footage is not enough to determine the proper size needed. Replacing a furnace is a big investment for any family to undertake, and the last thing you should want is for that new system to be the wrong size for your home. The consequences of doing so include:
Most people need the help of a professional contractor in order to find the right size system for their home. The contractor will do a load calculation on your home, as well as consider several other factors before choosing the system that will work best for you and your family’s heating needs. Some of the points that they consider include:
These are just a few of the many checks that a real expert will check. If you find that your contractor is willing to quote you over the phone, you should consider using another company. These measurements cannot be performed over the phone and neglecting to take all of these into consideration could land you with an improperly sized heating system this winter. We offer free in home estimates on all new furnaces. Our Comfort Specialist will carefully assess your home to ensure you have the right size furnace!
Often times you’ll hear us discuss the importance of energy efficiency when referring to new furnaces or boilers. But how can energy efficient HVAC Systems help you save money?
Furnace and boiler efficiency is measured in AFUE or Annual Fuel Utilization Efficiency. This is a percentage that represents the amount of natural gas that is actually converted into heat for your home.
For instance, an 80% AFUE furnace uses 80% of its gas to create heat, and the other 20% is lost during the combustion process. Therefore, the higher the percentage, the less gas you will use, and the lower your energy bills will be. There are different efficiency ranges, and it is important to understand the benefits and losses associated with owning a unit that falls within one of these ranges.
Depending on the age of your system, you may already have an idea of how inefficient it truly is. If you are interested in learning more about the energy efficient systems we offer or if you need help determining the efficiency of your current furnace or boiler, fill out our online form to schedule your free in-home estimate.
Our highly trained HVAC service technicians are able to handle a variety of issues. From boilers and furnaces to heat pumps and air conditioners, our technicians are proficiently trained to handle nearly any situation your HVAC systems can throw at them. However, the expertise of our technicians is not needed in every situation. Hundreds of times a year, we have customers who call us out for problems that really aren’t problems at all. Flipping a switch and setting a thermostat are “repairs” that nearly any homeowner can handle on their own. We know that our customers work hard for their money, and that they don’t want to waste it on unnecessary service calls. So, the next time the furnace breaks down, there are a few points to check before calling.
Once you have performed all of these checks and your unit still won’t kick on, it is time to call us. The good news is that our team of friendly and knowledgeable repair technicians is available 24/7 for all of your heating repair needs.
Is your old furnace costing you money? Is it breaking down frequently or not keeping up with the heating demands of your home? Listed below are common reasons why you should consider replacing an old furnace.
At Matz-Rightway, our factory trained and licensed comfort technicians are always available to help and answer any of your questions. If you feel it’s time to replace your old furnace, we offer free no-obligation in home estimates! Backed by an A+ rating from the Better Business Bureau and over 65 years experience, turn to the experts at Matz-Rightway for all of your heating needs! Schedule your free estimate for a new heating system today!
There are basically four categories that all air conditioner breakdowns fall into, and depending on the age, location, and condition or your air conditioner, you may be able to figure out which category your broken air conditioner falls into. Matz-Rightway can repair or replace your system no matter the cause of its problem.
If you think you may know what is causing your problem, or even if you have no idea, call Matz-Rightway! Our NATE certified technicians are available 24/7 for all of your air conditioner repair, maintenance, and installation needs. Click here to request service!